Abstract
The aim of the present study is the representation of a method to identify and prioritize accident-prone sections (APSs) based upon efficiency concept to emphasize accidents with regard to traffic, geometric and environmental circumstances of road which can consider the interaction of accidents as well as their casual factors. This study incorporates the segmentation procedure into data envelopment analysis (DEA) technique which has no requirement of distribution function and special assumptions, unlike the regression models. A case study has been done on 144.4km length of Iran roads to describe the approach. Eleven accident-prone sections were identified among 154 sections obtained from the segmentation process and their prioritization was made based on the inefficiency values coming from DEA method. The comparisons demonstrated that the frequency and severity of accidents would not be only considered as the main factors for black-spots identification but proper rating can be possible by obtaining inefficiency values from this method for the road sections. This approach could applicably offer decision-making units for identifying accident-prone sections and their prioritizations. Also, it can be used to prioritize intersections, roundabouts or the total roads of the safety organization domain.References
Legal medicine organization, (2011). Available at: http://lmo.ir/uploads/1_72_tas8908%20koli.pdf. Accessed January 2011
Montella, A.: “A comparative analysis of hotspot identification methods”. Accident Analysis & Prevention, Vol. 42, No. 2, pp. 571-581, 2010
Geurts, K., Wets, G.: Black spot analysis methods: Literature review, Report number: RA2003- 07, Diepenbeek, Belgium. Flemish Research Center for Traffic Safety, 2003
Elvik, R.: State-of-the-art approaches to road accident black spot management and safety analysis of road networks, Document No. 883, Institute of Transport Economics, Oslo, 2007
Hauer, E., Kononov, J., Allery, B. and Griffith, M.S.: “Screening the Road Network for Sites with Promise”. Transportation Research Record, Vol. 1784, pp. 27-32, 2002
Montella, A.: “Safety reviews of existing roads: quantitative safety assessment methodology“. Transportation Research Record, Vol. 1922, pp. 62-72, 2005
Cheng, W. and Washington, S.P.: “Experimental evaluation of hotspot identification methods”. Accident Analysis & Prevention, Vol. 37, No. 5, pp. 870-881, 2005
Heydecker, B.G. and Wu, J.: “Identification of sites for road accident remedial work by Bayesian statistical methods: an example of uncertain inference”. Advances in Engineering Software, Vol. 32, No. 10-11, pp. 859-869, 2001
Miaou, S.-P. and Song, J.J.: “Bayesian ranking of sites for engineering safety improvements: Decision parameter, treatability concept, statistical criterion, and spatial dependence”. Accident Analysis & Prevention, Vol. 37, No. 4, pp. 699-720, 2005
Miranda-Moreno, L.F., Fu, L., Saccomanno, F.F. and Labbe, A.: “Alternative risk models for ranking locations for safety improvement“. Transportation Research Record, Vol. 1908, pp. 1-8, 2005
Persaud, B., Lyon, C., Nguyen, T.: “Empirical bayes procedure for ranking sites for safety investigation by potential for safety improvement”. Transportation Research Record, Vol. 1665 pp. 7-12, 1999
Tunaru, R.: “Hierarchical Bayesian models for multiple count data”. Austrian Journal of statistics, Vol. 31, No. 2 & 3, pp. 221–229, 2002
Hauer, E., Persaud, B.N.: “Problem of identifying hazardous locations using accident data”. Transportation Research Record, Vol. 975, pp. 36–43, 1984
Flak, M.A. and Barbaresso, J.C.: “Use of computerized roadway information system in safety analyses”. Transportation Research Record, Vol. 844, pp. 50–55, 1982
Sayed, T., Abdelwahab, W. and Navin, F.: “Identifying accident-prone locations using fuzzy pattern recognition”. Journal of Transportation Engineering, Vol. 121, No. 4, pp. 352-358, 1995
Hauer, E., Allery, B.K., Kononov, J. and Griffith, M.S.: “How best to rank sites with promise”. Transportation Research Record, Vol. 1897, pp. 48-54, 2004
Geurts, K., Wets, G., Brijs, T. and Vanhoof, K.: “Identification and Ranking of Black Spots: Sensitivity Analysis“. Transportation Research Record, Vol. 1897, pp. 34-42, 2004
Elvik, R.: “A survey of operational definitions of hazardous road locations in some European countries”. Accident Analysis & Prevention, Vol. 40, No. 6, pp. 1830-1835, 2008
Charnes, A., Cooper, W.W. and Rhodes, E.: “Measuring the efficiency of decision making units”. European Journal of Operational Research, Vol. 2, No. 6, pp. 429-444, 1978
Farrell, M.J.: “The measurement of productive efficiency”. Royal Statistical Society, Vol. Series A General120, No. 3, pp. 253–281, 1957
Mehregan, M.R.: Quantitative Models in Organizations Performances, second edition, Management Faculty of University of Tehran Pub., Tehran, 2008
Mohebalizadeh, H. and Faez, F.: “Multiple objective approach for suppliers evaluation by multiple criteria data envelopment analysis”. Indestreis Engineering Technical, Vol. 43, No. 1, pp. 67-82, 2009
Sowlati, T., Paradi, J.C. and Suld, C.: “Information systems project prioritization using data envelopment analysis”. Mathematical and Computer Modelling, Vol. 41, No. 11-12, pp. 1279-1298, 2005
Jahanshahloo, G.R., Hosseinzadeh Lotfi, F., Khanmohammadi, M., Kazemimanesh M., and Rezaie, V.: “Ranking of units by positive ideal DMU with common weights”. Expert Systems with Applications, Vol. 37, No. 12, pp. 7483-7488, 2010
Andersen, P. and Petersen, N.C.: “A procedure for ranking efficient units in data envelopment analysis”. Management Science, Vol. 39, No. 10, pp. 1261-1264, 1993
Abdel-Aty, M.A. and Radwan, A.E.: “Modeling traffic accident occurrence and involvement”. Accident Analysis & Prevention, Vol. 32, No. 5, pp. 633-642, 2000
Cafiso, S., La Cava, G., Montella, A. and Pappalardo, G.: “A Procedure to improve safety inspections effectiveness and reliability on rural two–lane highways”. The Baltic Journal of Road and Bridge Engineering, Vol. 1, No. 3, pp. 143-150, 2006
Cafiso, S., Di Graziano, A., Di Silvestro, G., and La Cava, G.: “Safety performance indicators for local rural roads: a comprehensive procedure from low-cost data survey to accident prediction model”, TRB 87th Annual Meeting Compendium of Papers. National Research Council, Washington, DC, 2008
Cafiso, S., Di Graziano, A., Di Silvestro, G., La Cava, G. and Persaud, B.: “Development of comprehensive accident models for two-lane rural highways using exposure, geometry, consistency and context variables”. Accident Analysis & Prevention, Vol. 42, No. 4, pp. 1072-1079, 2010
Pardillo, J.M. and Llamas, R.: “Relevant variables for crash rate prediction in Spain’s two lane rural roads”, TRB 82nd Annual Meeting Compendium of Papers, CD-ROM, TRB. National Research Council, Washington, DC, 2003
Vogt, A. and Bared, J.: “Accident Models for Two-Lane Rural Segments and Intersections”. Transportation Research Record, Vol. 1635, pp. 18-29, 1998
Zhang, C. and Ivan, J.N.: “Effects of Geometric Characteristics on Head-On Crash Incidence on Two-Lane Roads in Connecticut“. Transportation Research Record, Vol. 1908, pp. 159-164, 2005
Anderson, I.B., Bauer, K.M., Harwood, D.W., Fitzpatrick, K.: “Relationship to safety of geometric design consistency measures for rural two-lane highways“. Transportation Research Record, Vol. 1658, pp. 43-51, 1999
Hassan, Y., Sayed, T. and Tabernero, V.: “Establishing Practical Approach for Design Consistency Evaluation”. Journal of Transportation Engineering, Vol. 127, No. 4, pp. 295-302, 2001
Lamm, R., Choueiri, E.M. and Mailaender, T.: “Side friction demand versus side friction assumed for curvedesign on two-lane rural highways”. Transportation Research Record, Vol. 1303, pp. 11-21, 1991
Nicholson, A.: “Superelevation, side friction, and roadway consistency”. Journal of Transportation Engineering, Vol. 124, No. 5, pp. 411-418, 1998
Federal Highway Administration, Alternative design consistency rating methods for two-lane rural highways, Federal Highway Administration, US Department of Transportation, 2000
Huang, Y.H.: Pavement analysis and design, Second Edition, Pearson Prentice Hall, USA, 2004
AASHTO, Roadside Design Guide, Second edition, American Association of State Highway and Transportation Officials, 2 Ed., Washington, DC, 1996
Ayati, E.: Rural Traffic Accidents in Iran (Analysis, comarison and the Cost). Ferdowsi University Press, Iran, Mashhad, 1992
Samuel, C., Keren, N., Shelley, M.C. and Freeman, S.A.: “Frequency analysis of hazardous material transportation incidents as a function of distance from origin to incident location”. Journal of Loss Prevention in the Process Industries, Vol. 22, No. 6, pp. 783-790, 2009
Statistical Center of Iran, Available at: http://lmo.ir/uploads/1_72_tas8908%20koli.pdf. Accessed January 2011, 2006
Geurts, K., Wets, G., Brijs, T., Vanhoof, K. and Karlis, D.: “Ranking and selecting dangerous crash locations: Correcting for the number of passengers and Bayesian ranking plots”. Journal of Safety Research, Vol. 37, No. 1, pp. 83-91, 2006
Yazdani, H.: Investigating the Identification and Prioritization Methods of Black spots and their Applications, Civil Engineering, Ferdowsi University of Mashhad, Mashhad, 2010